Quote Emissions

Quote Emissions



Info
 CocoonOPS automatically estimates the GHG emissions when the weight, ports, collection or delivery locations are changed! 


Once CocoonOPS has enough information entered, it will use our sophisticated CocoonCarbon® technology to estimate the emissions of the Consignment and what would be required to offset them.

Information About GHG Emission Estimates

  1.     WTW (Well-to-Wheel): This refers to the total life-cycle emissions of a vehicle or fuel, encompassing both the production and consumption stages
  2.     TTW (Tank-to-Wheel): This focuses solely on the emissions produced during the operation of the vehicle (i.e., while the fuel is being burned or the energy is consumed). It excludes upstream emissions from fuel production and distribution
  3.     WTT (Well-to-Tank): This refers to emissions generated from the production, processing, and transportation of the fuel or energy source up to the point where it is stored in the vehicle (the "tank"). It covers the "upstream" emissions part of the fuel life-cycle

The carbon emissions we provide is Wheel to Wheel (WTW) unless specified. We follow GHG Protocol Framework and aligned to GLEC ISO 14083 standards

The Carbon balance is the difference between the CO2 emissions and the CO2 offset

To make the balance position you need click the [ Remediation ] button.
This will open a light box where you can enter the information of how you offset the emissions.

If your using Voluntary cancellation certificates (VCC)/Certified Emission reductions (CERs) you can enter the certificates information into this area.

Manually Requesting GHG Estimates


Alert
This is only available to users with the System Admin role
This is done by:
  1.     Selecting the [ ACTION ] menu on the instructions tab
  2.     Clicking the [ Request GHG Emissions ] menu option

GHG emissions estimates are extremely complex and may take some time based on the complexity of your shipment, this is normally done within a few minutes. 

    • Related Articles

    • Quotes

      Quote are used to manage potential business in CocoonOPS. Import information about the quotes is show on the right-hand side of the screens. This shows the status of the quote: Red indicates there is an issue and immediate action is needed Orange ...

    • CocoonCarbon® Assumptions

      CocoonCarbon® Formulas and assumptions used for the calculation of Estimation of CO2e emissions are based on the framework of accredited sources such as the Greenhouse Gas Protocol. Distances may differ as many factors can change the direction of ...

    • Default Settings

      Set the home country for you organisation, this is used as the default country for pick lists. Here you can set the default units of measurement used in the system. You can also turn on audit logging here. Here you can configure how the references ...

    • Duplicating Quotes

      Duplicating Quotes You can duplicate a quote to create and identical quote to issue to the customer. To duplicate a quote: Click on the on the INSTRUCTIONS tab Select the option A new quote will be generated, that is identical to the original. The ...

    • Emissions

      CocoonOPS ONLY estimates the GHG emissions at the point the consignment is confirmed! CocoonOPS will communicate with CocoonCarbon® to estimate the emissions of the consignment and what would be required to offset them. WTW (Well-to-Wheel): This ...